Description
Sci-Flex© Category 6A/6 RJ45 Plug and 8mm strain relief snag less boot
Sold In Quantities of 1, 5, 15, 20, 25, 50, and 100 pieces
Part # CAT6A8-RJ45
Category 6A/6 RJ45 Plug (Ethernet)
For .037″-.042″ Insulated Conductors and Cable Jackets up to .310″ with 8mm strain relief snag less boots (PATENTED Conductive NEXT Reduction System)
Conductor OD: up to 8mm Jacket OD: .314″ Nom.
Product Features:
8mm strain relief snag less boot
Prevents patch cords from “snagging” on other patch cords
Protects RJ45 Plug Tab from Breaking Off thereby Extending Connector Life
Relieves Conductor Stress
Minimizes cable bends that can Reduce Data Speed and potential Data Loss
Multiple color options available
Cat6A/6 RJ45 Plug
Shielded RJ45 plug with integral “C CRIMP” for added cable stress relief and additional strength.
Accepts up to .037″-.042″ Insulated Conductor OD’s and up to a .310″ cable jacket OD Incorporates a PATENTED CONDUCTIVE NEXT Reduction System.
In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS.
Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6A performance levels are achievable with good workmanship and certified cables. * Two piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements. * The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug. * Plug accepts both SOLID or STRANDED conductors Made in USA
Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801 Contact Material: Phosphor Bronze – .012″thick Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68) Plug Material: Polycarbonate Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68) UL Recognized: UL File #E188111 – UL 1863 (1000v) Flame Autoextinguish: 94V-0 Operating Temperature: -40º C to +85º C Insertion/Extraction Life: 1000 Minimum Cycles Contact Resistance: 10 Milli-Ohms maximum Current/Voltage: 30 VAC/57 VDC at 1.5 Amps Compliance: RoHS Compliant PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
Reviews
There are no reviews yet.